Angle grinder hire

100mm Angle Grinder Hire

For Cutting & Grinding Metal & Stone

Whether you need to cut stone or metal, grind down a surface or remove rust, our 100mm angle grinders provide all of the power and versatility needed to get these jobs done quickly and professionally - on site or in the workshop.

These angle grinders have a comfortable and ergonomic design, with a large side handle, a soft start feature and electronic speed control.

This makes these power tools very simple to handle and ensures that high quality results are easily achieved.

Book your 100mm angle grinder hire online or over the phone—choose to collect from your nearest depot at the start of the hire or have it delivered to you.

Cutting and Grinding Discs - add these to your order during checkout

We can also supply a range of cutting and grinding discs:

125mm Stone Cutting Disc - This flat disc is excellent for cutting stone, light concrete and decorative masonry.

125mm Metal Grinding Disc - This depressed centre disc is perfect for grinding steel and dressing welds.

125mm Metal Cutting Disc - This flat cutting disc is ideal for cutting steel.

125mm P3-M Mortar Raking Diamond Blade - This blade is an economical solution in preparation for re-pointing brick and block work. Dimensions: 125 x 6 x 7 x 22.2mm.

125mm P3-B Diamond Blade - This masonry cutting diamond blade offers unrivalled performance when compared to other low cost blades. Dimensions: 125 x 2.2 x 7 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks and concrete roof tiles.

Occasional Use: Flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete and cement screed (too much use on these materials could result in either overheating or rapid wear).

125mm P5-C12 Diamond Blade - With a 12mm diamond segment, this blade cuts through all types of concrete products, building materials and abrasive materials. Dimensions: 125 x 2.2 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks & concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete & cement screed.

115mm Angle Grinder Hire

For Cutting & Grinding Metal or Stone

These 115mm electric angle grinders are designed for grinding and cutting metal and stone.

They can be fitted with a range of abrasive discs or cutting blades to complete a huge range of jobs on site or in the workshop.

These high quality 110v power tools feature a small gear housing for easy handling and manoeuvrability, machined bevel gears, soft start and an ergonomic 20° side grip handle.

These features ensure that these angle grinders are high quality, professional standard pieces of equipment capable of getting the job done properly.

Book your 115mm angle grinder hire online or over the phone—choose to collect from your nearest depot at the start of the hire or have it delivered to you.

Cutting and Grinding Discs - add these to your order during checkout

We can also supply a range of cutting and grinding discs:

115mm Metal Grinding Disc - This depressed centre disc is perfect for grinding steel and dressing welds.

115mm Flat Metal Cutting Disc - This flat cutting disc is ideal for cutting steel.

115mm P3-M Mortar Raking Diamond Blade - This blade is an economical solution in preparation for re-pointing brick and block work. Dimensions: 115 x 6 x 7 x 22.2mm.

115mm P3-B Diamond Blade - This masonry cutting diamond blade offers unrivalled performance when compared to other low cost blades. Dimensions: 115 x 2.2 x 7 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks and concrete roof tiles.

Occasional Use: Flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete and cement screed (too much use on these materials could result in either overheating or rapid wear).

115mm P5-C12 Diamond Blade - With a 12mm diamond segment, this blade cuts through all types of concrete products, building materials and abrasive materials. Dimensions: 115 x 2.2 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks & concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete & cement screed.

125mm Angle Grinder Hire

Professional. Versatile. Effective.

Whether you need to cut stone or metal, grind down a surface or remove rust, our 125mm angle grinders provide all of the power and versatility needed to get these jobs done quickly and professionally - on site or in the workshop.

These angle grinders have a comfortable and ergonomic design, with a large side handle, a soft start feature and electronic speed control.

This makes these power tools very simple to handle and ensures that high quality results are easily achieved.

Book your 125mm angle grinder hire online or over the phone—choose to collect from your nearest depot at the start of the hire or have it delivered to you.

Cutting and Grinding Discs - add these to your order during checkout

We can also supply a range of cutting and grinding discs:

125mm Stone Cutting Disc - This flat disc is excellent for cutting stone, light concrete and decorative masonry.

125mm Metal Grinding Disc - This depressed centre disc is perfect for grinding steel and dressing welds.

125mm Metal Cutting Disc - This flat cutting disc is ideal for cutting steel.

125mm P3-M Mortar Raking Diamond Blade - This blade is an economical solution in preparation for re-pointing brick and block work. Dimensions: 125 x 6 x 7 x 22.2mm.

125mm P3-B Diamond Blade - This masonry cutting diamond blade offers unrivalled performance when compared to other low cost blades. Dimensions: 125 x 2.2 x 7 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks and concrete roof tiles.

Occasional Use: Flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete and cement screed (too much use on these materials could result in either overheating or rapid wear).

125mm P5-C12 Diamond Blade - With a 12mm diamond segment, this blade cuts through all types of concrete products, building materials and abrasive materials. Dimensions: 125 x 2.2 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks & concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete & cement screed.

180mm Angle Grinder Hire

Tough. Versatile. Effective.

Whether you need to cut stone or metal, grind down a surface or remove rust, 180mm angle grinders provide all of the power and versatility needed to get these jobs done quickly and professionally - on site or in the workshop.

These angle grinders have a comfortable and ergonomic design, with a large side handle, a soft start feature and electronic speed control.

This makes these power tools very simple to handle and ensures that high quality results are easily achieved.

Book your 180mm angle grinder hire online or over the phone—choose to collect from your nearest depot at the start of the hire or have it delivered to you.

Cutting and Grinding Discs - add these to your order during checkout

We can also supply a range of cutting and grinding discs:

125mm Stone Cutting Disc - This flat disc is excellent for cutting stone, light concrete and decorative masonry.

125mm Metal Grinding Disc - This depressed centre disc is perfect for grinding steel and dressing welds.

125mm Metal Cutting Disc - This flat cutting disc is ideal for cutting steel.

125mm P3-M Mortar Raking Diamond Blade - This blade is an economical solution in preparation for re-pointing brick and block work. Dimensions: 125 x 6 x 7 x 22.2mm.

125mm P3-B Diamond Blade - This masonry cutting diamond blade offers unrivalled performance when compared to other low cost blades. Dimensions: 125 x 2.2 x 7 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks and concrete roof tiles.

Occasional Use: Flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete and cement screed (too much use on these materials could result in either overheating or rapid wear).

125mm P5-C12 Diamond Blade - With a 12mm diamond segment, this blade cuts through all types of concrete products, building materials and abrasive materials. Dimensions: 125 x 2.2 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks & concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete & cement screed.

230mm Angle Grinder Hire

Versatile Cutting & Grinding Tools

230mm electric angle grinders are powerful and versatile pieces of equipment, perfect for a range of grinding and cutting jobs on site or in the workshop.

Fitted with a variety of abrasive grinding pads and cutting discs, these tools are ideal for working with metal or stone.

Our high-quality 110v electric angle grinders feature machined bevel gears, greater heat resistance, and a soft start, ensuring consistent, high-quality results every time.

Book your 230mm angle grinder hire online or over the phone—choose to collect from your nearest depot at the start of the hire or have it delivered to you.

Accessories - add these to your order during checkout

We offer a range of accessories for these electric angle grinders.

As they operate on 110v, a transformer is required for use with a 240v mains power supply.

Additionally, our Personal Protection Packs include:

Safety goggles

Safety gloves

Dust mask

Ear plugs

Cutting Blades and Grinding Discs

We offer a variety of cutting blades and grinding discs for purchase during checkout:

230mm Metal Grinding Disc - A depressed centre disc perfect for grinding steel and dressing welds.

230mm Metal Cutting Disc - A flat cutting disc ideal for cutting sheet steel and other steelwork.

230mm Stone Cutting Disc - A flat disc excellent for cutting stone, light concrete, and decorative masonry.

230mm P3-B Diamond Blade - A masonry cutting diamond blade with unrivalled performance compared to low-cost blades. Dimensions: 230 x 2.6 x 7 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks, and concrete roof tiles.

Occasional Use: Flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete, and cement screed (excessive use may lead to overheating or rapid wear).

230mm P4 Diamond Blade - A 4-in-1 multi-purpose fast-cutting turbo diamond blade with cooling holes. Dimensions: 230 x 2.6 x 10 x 22.2mm.

Ideally Suited: Marble, slate, Indian sandstone, granite, class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightly reinforced concrete, concrete, slabs, kerbs, pipes, and beams.

Occasional Use: Concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks, and concrete roof tiles (excessive use may lead to overheating or rapid wear).

230mm P5-C12 Diamond Blade - Features a 12mm diamond segment, cutting through all types of concrete products, building materials, and abrasive materials. Dimensions: 230 x 2.6 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks, and concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concrete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete, and cement screed.

Bore Diameter	16mm
Spindle Thread	M10
Wheel Size	100mm
Maximum Wheel Thickness	6.4mm
Input Wattage	720W
No Load Speed	11000rpm
Vibration K Factor	1.5m/sec²
Vibration - Artificial Wheel	7m/sec²
Length	266mm
Weight	1.7kg
Voltage	110v

Bore Diameter	16mm
Spindle Thread	M10
Wheel Size	100mm
Maximum Wheel Thickness	6.4mm
Input Wattage	720W
No Load Speed	11000rpm
Vibration K Factor	1.5m/sec²
Vibration - Artificial Wheel	7m/sec²
Length	266mm
Weight	1.7kg
Voltage	110v

Bore Diameter	22.23mm
Spindle Thread	M14
Wheel Size	115mm
Maximum Wheel Thickness	6.4mm
Input Wattage	720W
No Load Speed	11000rpm
Vibration K Factor	1.5m/sec²
Vibration - Artificial Wheel	7m/sec²
Length	266mm
Weight	1.8kg
Voltage	110v

Bore Diameter	22.23mm
Spindle Thread	M14
Wheel Size	115mm
Maximum Wheel Thickness	6.4mm
Input Wattage	720W
No Load Speed	11000rpm
Vibration K Factor	1.5m/sec²
Vibration - Artificial Wheel	7m/sec²
Length	266mm
Weight	1.8kg
Voltage	110v

Based On Makita GA9020S 230mm Angle Grinder

Bore Diameter	22mm
Spindle Thread	M14
Wheel Size	230mm
Maximum Wheel Thickness	6.5mm
Input Wattage	2000W
No Load Speed	6600rpm
Noise Sound Pressure	89dB(A)
Noise Sound Power	100dB(A)
Noise K Factor	3dB(A)
Vibration K Factor	1.5m/sec²
Vibration - Artificial Wheel	5.5m/sec²
Length	473mm
Weight	5.9kg
Voltage	110v

Please note: This product description and specification is based on the model most widely stocked across our network of partner stores. Alternative brands of equivalent specification may be supplied based on location and availability.