Fusion welder hire

20mm - 1000mm Proxima EF Fusion Welder Hire HDPE Electrofusion Welder This 40v fusion machine is designed specifically for quickly and efficiently connecting all major MDPE electro-fusion fittings. It uses the extreme heat and pressure produced during welding to make simple, reliable, rigid joints between pipes. The heat required to make the joint comes from flowing a constant electrical current through the embedded heater wires within the sleeve fitting, which is placed around the two pipes. The pressure required to make the joint is obtained via the shrinking of the fitting under welding conditions. The shrinking process does not alter the internal bore of the joint because the ends and the centre of the fitting are deliberately kept cold during the welding process. This ensures a strong, reliable professional joint. Once the joint is completed, the heater wires remain encased in the MDPE so there is no chance of corrosion. The connecting sleeve fitting must be fitted evenly between both pipes and the pipes must have clean cut, straight, burr-free edges to provide the most reliable, long-lasting joint. This electrofusion welder gives you functionality, reliability, and affordability and is capable of welding all brands of fittings between 20mm and 1000mm. It features a protective hard case, automatic fitting recognition, barcode scanning, and manual data entry options for ease of use. Ergonomically designed to sit on large diameter pipes, a large display and keypad, as well as a host of other features, will guarantee to satisfy the needs of the modern welding professional.

20mm - 1000mm Calder Pegasus HC Fusion Welder Hire HDPE & HPPE Electrofusion Welder This 40v fusion machine is designed specifically for quickly and efficiently connecting all major MDPE and HPPE electro-fusion fittings. This unit uses the extreme heat and pressure produced during welding to make simple, reliable, rigid joints between pipes. The heat required to make the joint comes from flowing a constant electrical current through the embedded heater wires within the sleeve fitting, which is placed around the two pipes. The pressure required to make the joint is obtained via the shrinking of the fitting under welding conditions. The shrinking process does not alter the internal bore of the joint because the ends and the centre of the fitting are deliberately kept cold during the welding process. This ensures a strong, reliable professional joint. Once the joint is completed, the heater wires remain encased in the MDPE so there is no chance of corrosion. The connecting sleeve fitting must be fitted evenly between both pipes and the pipes must have clean cut, straight, burr-free edges to provide the most reliable, long-lasting joint. This electrofusion welder gives you functionality, reliability, and affordability and is capable of welding all brands of fittings between 20mm and 1000mm. It features a protective hard case, automatic fitting recognition, barcode scanning, and manual data entry options for ease of use.

32mm - 315mm HDPE Fusion Welder Hire Ideal for Low Pressure PE Pipe Work Systems This HDPE fusion welder completes electrofusion fittings suitable for low pressure PE pipe work systems from 32mm to 315mm diameter. It can weld fittings commonly made by Geberit, Wavin, Valsir, Polypipe and Akatherm which are used for siphonic rainwater and waste water applications, and more. This fusion welder is easy to use as it offers fully automatic operation and it applies automatic temperature compensation to the weld time. It also has different colour welding cables to quickly identify different fittings. This 110v unit uses the extreme heat and pressure produced during welding to make simple, reliable, rigid joints between pipes. The heat required to make the joint comes from flowing a constant electrical current through the embedded heater wires within the sleeve fitting, which is placed around the two pipes. The pressure required to make the joint is obtained via the shrinking of the fitting under welding conditions. The shrinking process does not alter the internal bore of the joint because the ends and the centre of the fitting are deliberately kept cold during the welding process. This ensures a strong, reliable professional joint. Once the joint is completed, the heater wires remain encased in the HDPE so there is no chance of corrosion. The connecting sleeve fitting must be fitted evenly between both pipes and the pipes must have clean cut, straight, burr-free edges to provide the most reliable, long-lasting joint. The welding output of this HDPE fusion welder is a controlled current of 5A or 10A and a controlled voltage of 220V. It has been designed to operate on a 110V supply and has been made in a small lightweight plastic case making it easy to carry and protecting it from harsh construction site conditions. It is suitable for use with portable generators.

Input Voltage 110v Input Frequency 40 - 60Hz Input Current [Max. A] 16A Input Power 3kW Output Voltage [Vac RMS] 8 - 48v Output Current [Continuous. Aac RMS] 60A Environmental Protection IP54 Data Recording Capacity 704 Records Coupling Size Range 20mm - 1000mm Dimensions [HxWxL] 360 x 330 x 350mm Weight 26kg Case Material ABS & Aluminium Mains Input Cable Length 4m Fusion Output Cable Length 4m Standard

Coupling Size Range 20-1000mm Ø Dimensions [HxWxL] 500 x 350 x 280mm Weight 30kg Case Material ABS Plastic Mains Input Cable Length 10m Fusion Output Cable Length 4m Input Voltage 110v or 230v Input Frequency 40-60Hz Max. Input Current 30A (110v) / 16A (230v) Input Power 3.3kVA (110v) / 2.8kVA (230v) Output Voltage [Vac RMS] 8-48v Output Current [Continuous Aac RMS] 60A Environmental Protection IP55 Data Recording Capacity 2000 Records

Operating Modes Automatic Welding Voltage 30V to 220V Welding Current 5A to 13A Welding Time 80 – 240 Seconds Supply Voltage 110V Supply Current 32A Supply Power 3500W Weight 15KG